Home / Products  /  Integrated Circuits (ICs)  /  PMIC - LED Drivers  /  TPS92662AQPHPRQ1
TPS92662AQPHPRQ1-0.jpg0.0000000000 55000
Images are for reference. See Product Specification.

Texas Instruments TPS92662AQPHPRQ1

   
Manufacturer Part Number : TPS92662AQPHPRQ1
Manufacturer : Texas Instruments
Description : IC LED DRIVER RGLTR PWM
Package : 48-HTQFP
Datasheet : TPS92662AQPHPRQ1.PDF TPS92662AQPHPRQ1 PDF
EDA / CAD Models : TPS92662AQPHPRQ1 by SnapEDA
Base Product Number : TPS92662
Stock Condition :In Stock 55000, New Original
Quantity:
Delivery:
Payment:
1 136 7628398 /datasheets/IntegratedCircuits/TPS92662AQPHPRQ1-0.pdf texas-instruments/tps92662aqphprq1

Request for Quotation


Please fill the form and we'll get back to you within 24 hours.
Texas Instruments TPS92662AQPHPRQ1

In Stock: 55000   Qty:

The TPS92662AQPHPRQ1 is an automotive LED matrix controller from Texas Instruments, packaged in a 48-pin HTQFP measuring 7mm by 7mm and qualified to AEC-Q100 Grade 1 for operation from −40°C to 125°C. Rather than acting as a simple lamp driver, it sits between the LED driver and the LED string and controls the light at the level of individual LEDs: twelve integrated bypass switches can each short out one LED, so the controller shapes the beam by choosing which emitters stay lit. This is the mechanism behind adaptive front lighting, where the headlamp must bend, widen or blank out specific segments to avoid dazzling oncoming traffic, and the same idea applies to animated signalling and segmented rear lamps.

Texas Instruments TPS92662AQPHPRQ1 pacakge label

The device is built to live on a vehicle network and to be diagnosed remotely. It communicates over a multi-drop UART interface that is compatible with the CAN physical layer and with related devices in the same family, allowing many controllers to share one bus along a lamp assembly. An eight-bit ADC with two multiplexed inputs lets it measure temperatures and voltages locally, an I²C interface supports external EEPROM for storing calibration data, and ten-bit PWM dimming sets brightness precisely. An on-chip oscillator driver with programmable strength helps hold radiated and conducted emissions in check. Open and short LED detection with protection keeps a failed emitter from taking down the whole lamp, and time-division multiplexing lets several controllers work together to handle strings longer than twelve LEDs. The wide 4.5V to 60V input range means the module tolerates the voltage swings of a vehicle supply, including the transients that appear when loads switch.

As a professional Texas Instruments supplier and distributor, Nantian Electronics holds a large inventory of the TPS92662AQPHPRQ1 electronic component. We also provide the TPS92662AQPHPRQ1 parameters, its datasheet in PDF format and pin diagram instructions for download. If you would like to buy this part, please contact us and we will quote our best price. Welcome to send your inquiry and place your order.

Category:Integrated Circuits (ICs) PMIC - LED DriversVoltage - Supply (Max):60V
Manufacturer:Texas InstrumentsDimming:PWM
Packaging:Tape & Reel (TR)Operating Temperature:-40°C ~ 125°C (TA)
Part Status:ActiveGrade:Automotive
Type:DC DC RegulatorQualification:AEC-Q100
Topology:Step-Down (Buck), Step-Up (Boost)Mounting Type:Surface Mount
Internal Switch(s):YesPackage / Case:48-PowerTQFP
Number of Outputs:1Supplier Device Package:48-HTQFP (7x7)
Voltage - Supply (Min):4.5VBase Product Number:TPS92662


Q: What are the main features of the TPS92662AQPHPRQ1?

A: The TPS92662AQPHPRQ1 is an automotive-qualified 12-channel high-brightness LED matrix manager designed for advanced vehicle lighting systems. It operates over a wide input voltage range of 4.5 V to 60 V and integrates 12 LED bypass switches arranged in four groups of three. It supports programmable 10-bit PWM dimming, individual LED phase-shift and pulse-width control, and synchronization between multiple devices. Additional features include a multi-drop UART communication interface, an 8-bit ADC with two multiplexed inputs, an external EEPROM I²C interface, programmable crystal oscillator drive strength, and LED open-circuit and short-circuit detection. It is AEC-Q100 qualified for automotive operation from -40°C to +125°C and is housed in a 48-pin HTQFP package.

Q: What is the TPS92662AQPHPRQ1 used for?

A: This device is primarily used to control individual LEDs in automotive matrix headlight systems. Its integrated bypass switches allow the system to selectively turn individual LEDs on or off while maintaining current flow through the remaining LEDs in a string. This enables advanced adaptive driving beam (ADB) and glare-free high-beam functions, helping headlights adjust their illumination according to road conditions and surrounding vehicles. It is also suitable for sequential turn signals, animated daytime running lights, and other dynamic automotive lighting applications. Its communication and diagnostic functions allow a vehicle's main controller to configure LED behavior and monitor lighting faults.

Q: Does the TPS92662AQPHPRQ1 have any alternative manufacturers and part numbers?

A: There is no confirmed cross-manufacturer, pin-to-pin replacement for the TPS92662AQPHPRQ1. The Texas Instruments TPS92662QPHPRQ1 is a related earlier-generation device with similar 12-channel LED matrix management functions, while the TPS92663-Q1 is another related device in the same product family. These are useful comparison candidates but are not alternative manufacturers, and their features and compatibility should be checked carefully. For a different manufacturer's solution, an automotive LED matrix control design may need to be evaluated at the system level, including LED bypass architecture, channel count, communication interface, PWM control, fault detection, and software compatibility. Any substitute should be validated against the original circuit and application requirements.

Q: Is technical support available for the TPS92662AQPHPRQ1?

A: Yes. Nantian Electronics provides technical support for the TPS92662AQPHPRQ1, including assistance with product specifications, datasheet information, pin configuration, automotive lighting applications, and alternative component evaluation. Nantian Electronics can also assist with component sourcing, stock inquiries, and quotations.

Reviews for this product

Warranty & Returns

Warranty, Returns, and Additional Information

QA & Return Policy

Parts Quality Guarantee: 365 days

Returns for refund: within 90 days

Returns for Exchange: within 90 days

Shipping and Package

Shipping:Fedex ,UPS, DHL,TNT, SF.

Parts Packaging Guarantee:100% ESD anti-static protection, combined with high toughness and superior impact absorption.

Payment

Bank Wire Transfer, VISA, MaterCard,Paypal, Westerm Union

How we verify TPS92662AQPHPRQ1 authenticity?

At NTCHIP.com, we are committed to delivering the highest standards in electronic components. For critical Integrated Circuits (ICs)-PMIC - LED Drivers like the Texas Instruments TPS92662AQPHPRQ1, we operate a professional Quality Control (QC) center to ensure every unit you receive is factory-grade in quality and reliability.

Popular Categories

Related Manufacturers

Ratings for this product

Please rate the product !
Your name
Comments
Please enter your email and click get code.
Your email Get Code
Code
Please submit comments after verification your email.

Sumbit

We value your privacy

Our website uses cookies to ensure you are getting the best browsing experience, serve personalized content, and analyze our traffic.

By clicking "Accept Cookies", you consent to our use of cookies.

Privacy Policy
RFQ RFQ RFQ BOM BOM BOM Sell Sell Sell your Excess